Download Now
HP 2011 Series Wide LCD Monitor Driver

The x 20" Widescreen LED Backlit LCD Computer Display from Hewlett-Packard is a flat-panel monitor with an impressively thin design. The display is. Support for HDCP enables the monitor to display HDTV resolution if connected through the HDMI or DVI connector. Monitor without HDCP support, or connected. Product Information. The HP X computer monitor comes in a black flat screen design with a inch diagonal display. This LED monitor is 20 inches in size.


New Drivers: HP 2011 Series Wide LCD Monitor

Type: Driver
Rating:
4.82
403 (4.82)
Downloads: 544
File Size: 25.96Mb
Supported systems: Windows All
Price: Free* [*Free Registration Required]

Download Now
HP 2011 Series Wide LCD Monitor Driver

The factory default is Top. On The factory default is On.

HP 2011 Series Wide LCD Monitor Treiber Windows XP

When set to off, the light will remain off at all times. Sleep Timer Provides the timer-adjustment menu options: Set Current Time — Sets the current time in hours and minutes. Set Sleep Time — Sets the time you want to place the monitor in sleep mode. Set On Time — Sets the time you want the monitor to wake HP 2011 Series Wide LCD Monitor from sleep mode. Timer — Sets the Sleep Timer feature on or off; the default setting is Off. Sleep Now — Immediately sets the monitor to enter sleep mode.

Language Selects the language in which the OSD menu is displayed. The factory default is English.

HP 2011 Series Wide LCD Monitor Drivers Download

Information Selects and displays important information about the monitor. Current Settings Provides the current input video mode.

HP Pavilion x Monitor - Product Specifications HP® Customer Support

Recommended Settings Provides the recommended resolution mode and refresh rate for the monitor. Serial Number Reports the serial number of the monitor. The serial number is needed if contacting HP technical support. FW Version Reports the firmware version of the monitor. Backlight Hours Reports the total hours of backlight operation. Service Support For service support, go to: HP Support Web site.

Factory Reset Returns settings to factory defaults. Source Control Selects the video input signal. Default Source Selects the default or primary video input signal when the monitor is connected to two active and valid video sources. The monitor will automatically determine the video format.

The factory default is On. Exit Exits the OSD menu screen.

Identifying monitor conditions Special messages display on the HP 2011 Series Wide LCD Monitor screen for the following monitor conditions: Monitor Status — When the monitor is powered on or when the input source signal is changed, a Monitor Status message is displayed for five seconds. The message shows which input is the current active signal, the status of the auto-switch source setting On or Offthe default source signal, the current preset display resolution, and the recommended preset display resolution.

HP 2011 Series Wide LCD Monitor Download Drivers

Input Signal Out of Range — Indicates the monitor does not support the input signal on the video card, because its resolution or refresh rate is set higher than the monitor supports. Change your video card settings to a lower resolution or refresh rate.

HP 2011x, 2211x, 2311x, 2511x, and 2711x LED Monitors - Using the Monitor

Restart your computer for the new settings to take effect. Power Button Lockout — Indicates the Power button is locked.

If the Power button is locked, the warning message Power Button Lockout appears. If the Power button is locked, press and hold the Power button for 10 seconds to unlock the power button function.

If the Power button is unlocked, press and hold the Power button for 10 seconds to lock out the Power button function. Monitor Going to Sleep — Indicates the screen display is entering a sleep mode.

Related Posts